MAX CUT 3000 - UNION BROTHER(CHINA) CO., LTD

	Workers mark the timber for defects/grade using highlight pen. Ensure the improvement of product quality. Two marking desks for higher production capacity
	Automatically identify the marks. Measure the length of timber, forward the data to the control centre for calculation.
	Whole Cutting Process Control 1. operator enters process data and cutting list. 2. measure data are collected by the probe 3. intelligence calculates and decides the optimized solution. 4. control of the saw action, according to the cutting list. 5. defects automatically dumped. 6. information shared with the sorting area for storing operation
	Maxcut optimizing cutting process, according to the cutting list Quick cut execution : only 0.3 to 1.2s; High cutting accuracy : only 0.5 to 1.5mm; Cutting safety : strategic protections for workers; Replacement elements are available from all over the world Complete emergency/diagnosis system; 200mm width convey wheels for a regular slide; Pressured wheels for avoiding timber bruises; Common pressured wheels’ adjustment for time saving
	Correctly rejecting the defect saves wood, time and labor Automatic defects removal Multi save operation Rising of the process efficiency
	Automatic sorting system, according to desired grade and/or length Pushers controlled by computer Easier control & management by selecting grade and length; Outputs auto-calculating & auto-stop system; Save labor costs; Save room; Possible to add/disable pushers Possible to add selecting & transport equipment; Pushers’ pneumatic components are imported; Extended protection ensures the right sorting of even the smallest outputs.

Timber lengths to be machined:

Ingoing lengths	min./max.	400 - 6300 mm
Ingoing widths	min./max.	30 - 230 mm
Ingoing thicknesses	min./max.	20 - 80 mm
Cross sections	max.	230 x 20 mm
	max.	160 x 80 mm
Fixed length at rear of saw	min.	140 mm
Cutting tolerance		+/- 0.5 – 1.5 mm

(at a timber quality with a minimum share of resin and plane surface. min. tolerance for fixed lengths up to 1 m max. tolerance for fixed lengths up to 2.5m)

Timber species:

Soft-/Hardwood

Capacity:

Feed speed infinitely adjustable max.	300 m/min.
Cutting cycle	0.3 – 1.2 second.
Working height	900 mm

Connected loads:

Electric connected load	approx. 18 kW
Operating voltage	380 Volt / 50 Hz (C/s)
Voltage variations	max. 5 %
Air consumption	approx. 1200 NL / min.
Service pressure	approx. 8 bar
Interface diameter of air consumption ducts	16mm
Exhaust speed	approx. 30 m/s
Diameter of dust exhaust ducts	160mm(one), 80mm(one)
Basic colour	blue / gray